Item dimensions: 10.1 x 10.1 x 30.4 cm ;
Package dimensions: 19.3 x 5.84 x 5.33 cm ; 0.24 kg
Coral filter replacement for whirlpool filter 2 w10413645a edr2rxd1 how to replace. Note: filter must be pushed firmly into receiver and turned until filter is locked in place. If filter is not locked correctly, water will not flow. Do not use any tools to install this filter. Twist the old filter a quarter-turn counterclockwise. Pull the filter straight down and discard (don\'t worry, the water will shut off automatically). Remove the reusable color-keyed knob from the end. Slide the knob onto the end of the new filter. Push the new filter into the fridge until it stops and twist the filter a quarter-turn clockwise. Reset your change filter light (if your fridge has one) 9. Flush filter with 3-4 gallons of with water until water runs clear. Some noise is not uncommon as air is purged from the system. If filter sets for several days without use, flush a quart of water through the filter to remove stale water from refrigerator water lines to reduce the risk associated with the property damage due to water leakage, you must read and follow installation and use instructions before installation and use of this product. The disposable filter cartridge should be replaced at least every 6 months. Do not install on hot water supply lines. Do not install if water pressure is higher than 125 psi. Coral filters will not be legally responsible for any damage, including but not limited to property damage caused by water leakage.